A driveway that drains, never sprouts weeds and stays put.

Resin-bound surfacing: natural aggregate mixed with a clear resin and trowelled into a smooth, permeable driveway, at least 18mm deep for cars on UK makers' specs. No loose stones, no puddles, no weeds through the joints, laid over a base that lets the water away, in your choice of colour.

What you get

Drains right through

A permeable surface that lets rain soak straight through, so no standing water and no run-off off the front.

No loose stones

Every stone is bound into the resin. Unlike scattered gravel, nothing migrates onto the path, the lawn or the road.

Weed-free and low upkeep

A seamless surface with no joints for weeds to push through. A brush or a hose keeps it looking new.

A UV-stable resin

Aliphatic resin outside, because a non-UV resin can darken in sunlight within weeks, leaving pale patches where the car or bins stood.

How it works

01

Tell us the details

Tell us about the drive, what is down now and how it drains, and we spec the base and finish to suit.

02

Quote in writing

One fixed price for the whole drive, base work included, in your inbox. The price we quote is the price you pay.

03

Driveway laid

Prep the base, lay and trowel the resin-bound surface, then cure. We plan the work around a dry weather window.

Want a firm number? Send the size and your postcode and we come back with one written figure, not a range.

What resin-bound actually is

Resin-bound is aggregate and a clear resin mixed together and trowelled out into one smooth, continuous surface. Because the stone is fully coated and bound, the finished drive is firm underfoot with no loose gravel to kick about, and water drains straight through it rather than sitting on top. You choose the finish from a wide range of colours and styles, from natural golds to modern greys. Against loose gravel it drains just as well, but nothing migrates onto the path, the lawn or the road.

It is not the same as resin-bonded, where resin is laid down and loose stone is scattered over the top. Bonded looks similar on day one but sheds stones and is not permeable. We lay resin-bound for a driveway that drains and holds together. Our guide to resin-bound versus resin-bonded driveways breaks the difference down in full, and we also put resin up against block paving and tarmac, and against imprinted concrete.

For coatings on an existing patio or porch rather than a new bound surface, see our patios and outdoor flooring page. The same bound surface works on a garden or front path too: see resin-bound paths.

Depth follows the stone size

How thick a resin-bound drive needs to be depends on the stone in the mix and whether cars go on it. Vuba gives 15mm for foot traffic and 18mm for driveways. DALTEX says 18mm is the minimum for a BBA-approved install, because that is the depth that gives the surface its strength, and 15mm is for footpaths only. Addagrip goes further for larger stone: 18mm minimum with 6mm aggregate, 24mm with 10mm aggregate. Its finest 3mm blend is described as semi-porous and not recommended where SuDS drainage is required.

Vuba adds the line that catches out cheap jobs: the minimum "cannot be 'averaged' out over an area". A drive that is 22mm in one place and 12mm in another is not an 18mm drive, which is why the base has to be flat to within 3mm under a 1m straight edge before the resin goes down.

The mix is fixed too. DALTEX and RonaDeck both pair a 7.5kg resin pack with about 106 to 107kg of stone and sand, roughly 70kg of resin per tonne of stone, covering about 3.5 to 3.9m² at 18mm. Vuba's cube tests found a 6.5kg pack with the same stone 19% weaker. If a quote names the system, the pack size is a fair thing to ask about.

Permeable, so usually no planning headache

Because resin-bound lets water through, it counts as a permeable surface, and that is what matters at the front of a house. In England, a new or replacement driveway of any size needs no planning permission if it is permeable or drains to a lawn or border, while an impermeable surface over 5m² does. Wales requires a front hard surface to be permeable or to drain to a permeable area. Scotland asks for a porous surface, or run-off to a porous area, between the house and the road, and conservation areas fall outside the permitted rights. Our guide to planning permission for a resin driveway explains the rules in plain English.

The catch is that the resin is only half of it. Addagrip puts it plainly: the full construction, not just the wearing course, has to be considered when judging SuDS performance. RonaDeck and DALTEX both claim the surface itself drains up to 850 litres per m² per minute, but laid on solid concrete with nowhere for the water to go, a drive is not permeable in any useful sense. DALTEX labels its own concrete build "Non-permeable" and says it needs extra drainage, and says the surface over old macadam or concrete needs a suitable soakaway or drainage flow.

It is only as good as the base

For a new drive that cars will use, the UK makers converge on the same idea: an open-graded asphalt base over a free-draining stone sub-base. RonaDeck specifies 60mm of AC14 open-graded asphalt over 200mm of compacted Type 3; Addagrip 70mm of open-surface asphalt over 150mm of Type 3; Vuba recommends open-grade tarmac for every new project that takes vehicles. Type 3 matters because it is stone with gaps in it. Government guidance on front gardens explains that the usual Type 1 sub-base has a lot of sand and silt in it that stops water passing through easily.

A resin-bound surface needs a sound, well-drained base. If your existing concrete or tarmac is in good order we can often lay straight over it; if it is broken or moves, we put down a proper sub-base first, with a solid edge on every open side to hold the surface in. We assess what is there and flag anything that needs sorting first before we quote, so the finish bonds and stays put through the seasons. For what makes a sound base, and what resin cannot go over, see what resin can be laid over. It is the single biggest of the disadvantages of a resin driveway, and almost every one on that list comes down to the base and the install rather than the surface itself. If an existing resin drive has already failed, our guide to resin driveway repairs covers whether to patch or resurface. Laying one yourself? Our DIY resin driveway guide covers the base, the mix and the weather limits.

UV-stable or not: the question to ask

Resin-bound binders come in two kinds, and the quote should say which. Aliphatic resins are UV stable. Aromatic (non-UV) resins, in DALTEX's words, darken when exposed to sunlight "sometimes as quickly as within 2 weeks". The tell-tale sign is the patch under a car, a caravan or the wheelie bins staying its original colour while the rest of the drive turns. DALTEX recommends UV-stable resin for all outside work and notes the aliphatic systems are more flexible, so less liable to cracking. On a drive in the sun, we lay UV-stable.

Laying weather and when you can drive on it

Resin-bound is a dry-day job. RonaDeck says not to work below 5°C or above 25°C, not to lay when rain is expected during the cure, and that very heavy rain can wash resin and stone out. Addagrip's binder wants 5 to 30°C and humidity under 80%, and every system wants the surface at least 3°C above dew point, or condensation can foam the resin and lift it. Fog and mist stop the mixing too.

Once it is down, the waits are short. SureSet gives pedestrians 10 to 12 hours and vehicles 24 hours; RonaDeck foot traffic after 4 hours and light vehicles after 1 to 2 days at 20°C; Addagrip 12 to 18 hours for vehicles, with full chemical cure at 7 days. Colder days stretch every one of those.

One habit to drop once it is in: turning the steering wheel with the car stopped. Vuba warns that tyres turned while static or in slow, tight turns can damage the surface, and that loose stones driven onto it can cause delamination. Darker blends hide tyre marks better than light ones, RonaDeck notes.

How long a resin bound driveway lasts

A well-laid resin-bound driveway lasts for many years when the base underneath is sound and the mix is laid right. The base and the workmanship decide it far more than the weather. Our guide to how long a resin driveway lasts covers what to look for in a lasting job, and our guide to cleaning a resin driveway covers the upkeep that keeps it looking new.

What a resin driveway costs

Cost comes down to the area, the state of the base and access for the work, not a flat rate per square metre. We give one fixed written price for the whole job, with no guesswork on the day. Our guide to what a resin driveway costs walks through the drivers and why the base decides the price, and if the budget is tight, the cheapest driveway options puts resin next to gravel, tarmac and the rest.

Resin-bound driveway specs at a glance

Figures from UK resin-bound makers (Vuba, DALTEX, Addagrip, RonaDeck, SureSet) and government planning guidance. They vary by system, so ask which one your quote uses.

What you want to knowTypical figureWhat it means for you
Depth for cars18mm minimum (6mm stone); 24mm with 10mm stoneBelow the minimum the surface loses the strength it needs for cars
Depth for pathsAbout 15mm, foot traffic onlyPath depth is not driveway depth
Base for a new drive60 to 70mm open-graded asphalt over 150 to 200mm Type 3A free-draining base, not a Type 1 that holds water
Base flatnessWithin 3mm under a 1m straight edgeThe depth cannot be averaged out over dips
Resin to stone7.5kg pack to about 106kg of stone and sandA short-resin mix is weaker; one maker found 19% weaker
DrainageUp to 850 litres per m² per minute (maker claim)Only useful if the base underneath drains too
Laying weatherAbout 5 to 25°C, dry, 3°C above dew pointBooked against the forecast, not the calendar
Foot trafficAbout 4 to 12 hoursWalk on it the same evening or next morning
VehiclesAbout 12 hours to 2 days, by systemFull chemical cure about 7 days
Resin typeAliphatic (UV-stable) or aromatic (non-UV)Non-UV can darken within weeks in sun

Where we work

Anywhere in Great Britain

We lay resin-bound driveways anywhere in Great Britain. Whether you need planning permission depends on the surface, not the postcode, as our guide to planning permission for a resin driveway explains.

Resin in your city: Bristol, Newcastle, Glasgow, Manchester, London, Birmingham, Leeds, Liverpool, Sheffield, Leicester, Nottingham, Coventry, Derby, Plymouth, Bradford.

Common questions

Do I need planning permission for a resin driveway?
Usually not. Resin-bound is permeable, so it generally avoids the planning permission a new impermeable front driveway over a certain size can trigger. We talk it through for your property when we quote.
Can you lay it over my existing concrete or tarmac?
Often, yes, as long as the base is sound and drains. If it is cracked or moving we lay a fresh sub-base first. We assess it when we quote and tell you straight what it needs.
How thick is a resin bound driveway?
At least 18mm for cars with 6mm stone, and 24mm with 10mm stone, on UK makers' specs. About 15mm is for footpaths only. The minimum applies everywhere on the drive, so the base has to be flat first.
How soon can I drive on a new resin driveway?
UK makers give about 12 hours to 2 days for vehicles, depending on the system and the temperature, and about 7 days for full chemical cure. Foot traffic is usually fine within 4 to 12 hours.
Will weeds grow through it?
Not up through it. It cures into one seamless surface with no joints, so nothing pushes up the way it does between block paving or slabs. Wind-blown seed can occasionally take on top, and on a permeable drive government guidance says to pull weeds by hand or use a weed burner rather than weed killer.
Is it the same as resin-bonded gravel?
No. Resin-bonded scatters loose stone over a resin coat, so it sheds stones and is not permeable. We lay resin-bound, where the stone is mixed through the resin for a smooth, permeable, hard-wearing finish.
How much does a resin bound driveway cost?
It depends on the area, the condition of the base and access for the work. We do not work off a flat rate per square metre. You get one fixed written price for the whole job up front, with no surprises on the day.
What are the disadvantages of a resin bound driveway?
A resin-bound surface needs a sound, draining base and a dry weather window to lay, and it is only as good as the install. Laid right over the right base, it avoids the loose stones, weeds and puddles you get with gravel and block paving.
Are resin driveways slippery?
A resin-bound surface has natural grip from the aggregate. For a sloped or shaded drive we can work in an anti-slip grade for extra bite in the wet.

Get your quote.

Tell us about the space and we will come back with a written quote for the whole job.