Resin driveway vs imprinted concrete

Two poured, continuous driveway surfaces that age very differently. Here is how resin-bound and pattern imprinted concrete compare on cost, cracking, resealing, drainage, repairs and looks.

The short answer

Pattern imprinted concrete costs £90-£130 per m², lasts about 20 to 30 years, but needs resealing every 2 to 5 years and, as a solid slab, sheds water. Resin-bound costs £40-£70 per m² over a sound base, or roughly £65-£115 per m² with a new one, lasts about 15 to 25 years, needs no resealing cycle and lets rain drain through. Neither patches invisibly, so on both the workmanship on day one decides how it looks in year ten.

Imprinted concrete and resin-bound often end up on the same shortlist: both are poured on site, both cover a drive in one continuous surface rather than thousands of blocks, and both cost more than tarmac or gravel. They behave very differently over the years, though, and the difference comes down to one being a coloured concrete slab with a sealer on top, and the other being stone held in resin.

Resin-bound vs imprinted concrete at a glance

Pattern imprinted concreteResin-bound
Installed cost£90-£130 per m²£40-£70 per m² on a sound base; roughly £65-£115 per m² with a new one
LifespanAbout 20 to 30 years, if resealedAbout 15 to 25 years
ResealingEvery 2 to 5 years, £4-£15 per m²No set resealing cycle
CrackingControlled by sawn joints; cracks if they are missing or the base is poorOver concrete, follows the cracks in the slab underneath
DrainageSolid slab: water runs offPermeable, if the base drains
Front garden over 5m²Needs drainage to a lawn or border, or planning permissionNo planning needed on a permeable build
RepairsCannot be patched invisiblyCannot be patched invisibly
LookPressed brick, cobble or slate patterns, colouredNatural stone blends, smooth texture

Cost, now and later

Published UK rates put pattern imprinted concrete at £90-£130 per m² installed, and one cost site puts the average 60m² imprinted drive at about £7,100. One cost site is much lower, at £60 to £100, so expect quotes to spread. Resin-bound runs £40-£70 per m² laid over a sound existing base, and MyJobQuote's published range for a 60m² drive is £3,500-£5,500. If the old drive has to come out and a new base go in, add £25-£45 per m² for the resin, which puts the two in much the same band.

The running cost is where they part. Imprinted concrete wants resealing every few years: UK cost sites say three to five, Pavingexpert two to five (and two to four on another of its pages), at £4-£15 per m². On a 60m² drive that is roughly £240-£900 each time. A resin-bound surface has no resealing cycle. Upkeep is a brush and the occasional wash, as our page on how to clean a resin driveway sets out. Plain concrete, at £60-£90 per m², is the cheaper concrete option if you can live without the pattern; every surface is ranked side by side in our page on the cheapest driveway options.

Cracking: why imprinted concrete cracks

Concrete shrinks as it cures and moves with the seasons, so a slab will crack somewhere unless you tell it where. That is the job of crack control joints: lines sawn into the surface, roughly every 30 times the slab thickness. On a 100mm drive slab that is a joint about every three metres. The UK trade reference on imprinted concrete calls them essential on most jobs, and says correct sub-base preparation plus well-formed joints should eliminate unwanted cracking. When an imprinted drive does crack across the pattern, it is put down to bad workmanship: joints missing or too far apart, a slab thinner than the 100mm minimum for a drive, or a poor base.

Resin-bound is not immune. It is a thin layer, typically 18mm for a drive, so it follows the base. Laid on concrete, the slab's cracks and joints come up through the resin, which is why manufacturers say expansion joints in the concrete must be carried through. Laid on a new open-graded base built for it, there is no slab to crack. Our page on putting resin over cracked concrete covers when an old slab can stay.

Resealing, and what goes wrong with it

The colour and the shine on imprinted concrete are protected by a clear sealer, usually an acrylic. The trade reference gives it a life of two to five years before it should be recoated, and cost sites say every three to five. Let it go, and the coloured surface wears through to plain grey concrete where the wheels run, and the colour fades.

The sealer trap

A sealer applied to a damp drive can turn cloudy or milky, and in most cases that is permanent. Even a light drizzle, an overnight fog or a heavy dew after sealing can cause it. So every reseal needs a dry spell, a properly dry surface and someone who knows the product. Imprinted concrete is a low-maintenance drive only if that reseal gets done, and done well.

Lifespan

Here imprinted concrete has the edge in years. UK sources put a well-laid, regularly resealed imprinted drive at around 20 to 30 years. A resin-bound drive typically lasts around 15 to 25 years. Both figures assume a sound base and good workmanship; a bad base shortens either one. The resin figure comes with no reseal visits along the way. There is more on what decides it in how long a resin driveway lasts.

Faded imprinted drive you are tired of resealing?

Tell us its size and whether it has cracked. We will tell you if the slab is sound enough to go under resin, and put a written price on it.

Permeability and planning

Imprinted concrete is a solid slab, so rain runs off it. In England, the government guidance says that covering more than five square metres of front garden with an impermeable surface needs planning permission, unless the water is directed to a lawn or border to drain naturally. In practice that means channel drains, a soakaway or falls onto a planted edge, all of which go into the price. A resin-bound drive on a permeable base lets the water through and needs no permission for any size. Outside England the detail can change, so a Welsh or Scottish drive is worth a call to the council first. Our page on planning permission for a resin driveway covers it in full.

One honest catch: resin laid over an existing concrete or imprinted slab is only as permeable as the slab, so the water drains through the resin and then across the concrete. That base needs falls and a drainage point, the same as the imprinted drive did.

Repairs

Neither surface can be patched invisibly. With imprinted concrete, the colour is dyed and hardened into the surface on the day, and a new section of slab never quite matches the weathered old one. With resin-bound, the fix is to cut out the damaged area and resurface it, and a fresh patch of resin and stone will look fresher than the drive around it until it weathers in. On both, the way to avoid a repair is the base and the build, as our page on resin driveway repairs explains.

Looks

Imprinted concrete is pressed with a pattern while wet, usually brick, cobble or slate-style stone, in a coloured finish. Up close it reads as patterned concrete, and the trade reference warns that patchy colour from an uneven spread of the colour hardener is almost impossible to put right later. Resin-bound is real stone, in blends from pale golds to greys and dark browns, with an even texture and no repeating pattern. Our page on resin driveway colours and styles shows the range.

Can resin go over an imprinted concrete drive?

Sometimes. Underneath the pattern it is a concrete slab, and resin makers list sound concrete as a suitable base, with its joints carried through the resin. What has to be judged on site is the pressed texture and the old sealer on top, and whether the slab is still sound. A slab that is cracked across the pattern, sinking or rocking needs the cause sorting first, and a solid slab still needs falls and a drainage point under the resin. Our page on what resin can be laid over goes through each case.

So which should you choose?

Choose pattern imprinted concrete when:

  • You want a pressed brick or cobble look in one poured surface.
  • You are happy to reseal every two to five years.
  • Drainage to a lawn or border is easy to arrange, or the drive is not in a front garden.

Choose a resin-bound driveway when:

  • You want natural stone in an even finish, with no resealing cycle.
  • Rain should drain through the drive rather than off it.
  • You have a sound tarmac, concrete or imprinted base it can go over.

About this page

Who wrote this

The Obsidian Resin team. We lay resin-bound driveways anywhere in Great Britain, and imprinted concrete is the surface we are most often asked to compare against, and to go over.

Where the facts come from

Every £ figure is a 2026 UK market range from published cost sites; none of them is our price. Joint spacing, slab thickness, sealer life and repair points come from the UK paving trade reference on imprinted concrete and from UK resin manufacturers' data sheets. The planning rule is the government's guidance on permeable surfacing of front gardens.

Our honest position

We lay resin, not imprinted concrete. Imprinted concrete lasts longer in years if it is looked after, and we have said so. Where resin wins is the drainage, the planning, and the years without a reseal.

Frequently asked questions

Is resin cheaper than imprinted concrete?
Over a sound existing base, usually: resin-bound is £40-£70 per m² against £90-£130 per m² for imprinted concrete. With a new base the two land in much the same band. Imprinted concrete then needs resealing every two to five years at £4-£15 per m².
How much does a concrete driveway cost in the UK?
Plain or brushed concrete is £60-£90 per m² installed, though cost sites range from £50 to £125. Pattern imprinted concrete is £90-£130 per m², and one UK cost site puts the average 60m² imprinted drive at about £7,100.
Is it cheaper to tarmac or concrete a driveway?
Tarmac, at £40-£80 per m² against £60-£90 per m² for plain concrete and £90-£130 per m² for imprinted. Concrete usually lasts longer.
What are the downsides of a concrete driveway?
It sheds water, so a front drive over five square metres needs drainage or planning permission. It cracks if the control joints are missing or the base is poor. Imprinted concrete also needs resealing every two to five years, and neither kind can be patched invisibly.
Does imprinted concrete crack?
It can. Sawn crack control joints, about every 30 times the slab thickness, tell it where to move. Missing joints, a thin slab or a poor sub-base are the usual reasons for cracks across the pattern.
How often does imprinted concrete need resealing?
Every three to five years by UK cost sites, two to five by the trade reference. Seal it only when the surface is fully dry: damp under the sealer can turn it permanently milky.
Can you lay resin over imprinted concrete?
Sometimes. Under the pattern it is concrete, which resin makers accept as a base when it is sound, with its joints carried through. The pressed texture and old sealer are judged on site, and a slab cracked across the pattern or sinking needs sorting first.

Read enough? Send us the space and your postcode, and get the written figure for your own floor or driveway.