Floors that grip, wet or dry.
Anti-slip resin flooring that grips under wet boots, feet and tyres without losing the finish. For bathrooms, kitchens, garages, ramps and commercial areas.
What you get
Grip to the job
We dial the aggregate from a light texture to a heavy-duty grip to suit the area.
Keeps the look
Added into the topcoat, so you get safety without an ugly industrial finish.
Wet-area ready
Ideal for ramps, entrances, washdowns and anywhere water collects.
Easy to clean
Sealed and seamless, so it still mops and hoses down cleanly.
How it works
Tell us the details
Tell us where the slips happen and the grip level you need.
Quote in writing
A written quote with one fixed price for the job, nothing tucked in the small print.
New floor laid
Grind, prep and pour, then broadcast the grip, seal and cure.
Want a firm number? Send the size and your postcode and we come back with one written figure, not a range.
Anti-slip is a setting, not a separate floor
First thing to know: you do not pick anti-slip on its own. You pick a base finish, then we add the grip into it. Start with the look you want, whether that is metallic, flake, solid colour or quartz, and anti-slip is the texture we work into that finish so it grips. There is no plain "anti-slip floor" to choose; it rides on the floor you already wanted.
Anti-slip flooring is something we build into the floor rather than a different product. A fine aggregate is broadcast into the topcoat at the grip level the area needs, so a glossy garage floor can still be safe underfoot, and a ramp or entrance gets the heavier grip it needs. The same fine anti-slip works in a kitchen and on stairs, and we step the grade up for anyone less steady on their feet.
For the toughest, grippiest wet-area surfaces we step up to a quartz build, and the same approach makes a bathroom or wet-room floor safe underfoot when it is soaking wet. It is the same trick we use to keep a home gym resin floor sure underfoot once sweat starts hitting the surface.
Safe without looking like it
The point of doing it in the topcoat is that you keep the finish you wanted, whether that is a metallic or a solid colour, and gain grip without the floor looking like a fire escape. Regular cleaning keeps the grip working; our guide to cleaning and maintaining a resin floor covers keeping the texture clear.
The numbers show why it matters. UK slip resistance is measured with a pendulum test, and the HSE reads a wet pendulum test value (PTV) of 0 to 24 as high slip potential and 36 or more as low. One UK maker publishes a smooth sealed flake floor at PTV 67 dry but only 17 wet, and 27 wet once polymer beads go into the seal. Gritted systems on UK data sheets reach a wet PTV of 55 or more: Watco Stepmarker publishes 56.
Grip is graded by how much aggregate goes on. A light scatter runs about 0.2 to 1kg per m²; a full blind broadcast for a ramp or loading entrance is about 3kg per m². That is the dial we turn between the rows in the table below.
How much grip for which room
Anti-slip is not a single setting. We grade the aggregate to how the room is used, so a dry living space stays smooth underfoot and a washdown bay grips under wet boots. This is roughly how we spec it.
| Where it goes | Grip level | What it feels like underfoot |
|---|---|---|
| Living room, hallway, bedroom | None or light sheen | Smooth gloss or satin; a dry room does not need added grip |
| Kitchen, gloss garage floor | Fine anti-slip | A barely-there texture that still wipes and mops clean |
| Bathroom, wet room, entrance | Medium | Grips underfoot when the floor is wet |
| Ramp, washdown, commercial unit | Heavy-duty or quartz | Full bite under wet boots, trolleys and tyres |
Where we work
Anywhere in Great Britain
We add anti-slip grades to floors anywhere in Great Britain, from wet-room showers to loading ramps. Tell us where the floor sits and what will be on it, and we match the grit size to the traffic. Our guide to how a resin floor is installed shows where the aggregate goes in the build.
Resin in your city: Bristol, Newcastle, Glasgow, Manchester, London, Birmingham, Leeds, Liverpool, Sheffield, Leicester, Nottingham, Coventry, Derby, Plymouth, Bradford.
Common questions
- Is epoxy resin anti-slip on its own?
- Not by default. A bare gloss epoxy floor is smooth and can be slick once it is wet. It becomes anti-slip when we broadcast a fine aggregate into the topcoat, so the grip is something we add to the finish rather than a property the resin has on its own.
- Does anti-slip ruin the look of a gloss floor?
- No. A fine grade keeps the finish looking sharp while adding grip. Tell us where it needs the most grip and we spec the grade to suit.
- How much grip can you add?
- From a barely-there texture to a heavy-duty wet-area grip. We match it to where and how the floor gets used.
- Is it harder to clean?
- Slightly more texture, but it is sealed and seamless so it still washes down cleanly. Heavy grip areas just take a stiffer brush.
- Is a resin floor slippery when wet?
- A bare gloss resin floor can be slick once it is wet. That is exactly what the anti-slip topcoat fixes: we broadcast a fine aggregate into the seal so the floor grips under wet feet and boots, and we set the grade to the area. Tell us where the wet zones are and we match the grip to them.
- How do you make an epoxy or resin floor non-slip?
- We broadcast a fine anti-slip aggregate into the topcoat while it is wet, then seal over it. That leaves a textured surface that grips without feeling rough, and we dial the grade from a light texture to a heavy-duty wet-area grip to suit the room.
Get your quote.
Tell us about the space and we will come back with a written quote for the whole job.