Resin driveways in Bristol

In Bristol, the kerb decides the driveway. If the car has to cross the pavement to reach your drive, you need a dropped kerb, and Bristol City Council only grants one for a space at least 4.8 metres deep, laid in a permeable surface with no loose gravel, after a £357 licence. We lay resin-bound, the stone mixed right through the resin so rain drains through it, and we give one fixed written price for the whole job.

Bristol in numbers

WhatBristolWhat it means for your floor or drive
Dropped kerb licence£357 domestic (£536 if applied for after the kerb is cut)Apply before any work on the pavement. A kerb cut without a licence can mean enforcement, the higher retrospective fee or putting the kerb back.
Parking space behind the kerb4.8 m deep by 2.4 m wide (5.3 m deep on an A, B or C road)Measure from the pavement edge to the house first. A front garden shallower than this will not get a kerb, whatever the surface.
Surfaces the council listsPorous asphalt, porous blocks or permeable paving; no loose gravelResin-bound is not named on the list, so agree the surface with the Highway Licences team before you apply. Loose-stone resin-bonded is the wrong choice next to a new kerb.
Conservation areas33In one, taking out a gate pillar, wall or fence over one metre high for car access needs planning permission. Check the Know Your Place map.
Article 4: Cotham and RedlandPermission needed to form hard standingsA porous resin drive still needs a planning application here, and so does demolishing the front wall. In Henleaze, taking down a wall, gate or fence needs one too.
Surface water flood riskAround 3,400 propertiesThe council's flood strategy aims to stop new impermeable surfaces unless their runoff is managed. A drive rain soaks through fits that aim.
Detached homes6.0% (England and Wales 23.2%)About a quarter of the national share. Terraces are the biggest group at 32.1%, so check the front garden against the 4.8 m depth rule before anything else.
Homes in a converted or shared house10.2% (3.4%)Three times the national share. A house divided into flats needs planning permission for a dropped kerb.

Tell us the size of the space and your postcode, and we send one written price for the whole job.

Start with the dropped kerb, not the colour

Bristol City Council does not lower kerbs for driveways. You check if planning permission is needed, make sure the drive meets the council's standards, then a contractor applies for a combined excavation and vehicle crossover licence, which costs £357 for a home and £1,427 for a business. A Highway Officer visits, and the Highway Licences team writes back to approve the crossing, with any conditions, or to refuse it with reasons. Keep the signed form with your deeds.

The space behind the kerb has to hold a car without any of it sitting over the pavement: at least 4.8 metres from the pavement edge to the house and 2.4 metres wide for one car, or 4.8 metres wide for two. For parking parallel to the pavement, the space is 3 by 6 metres. On an A, B or C road the guide rises to 5.3 metres deep by 3 metres wide, parallel parking is generally ruled out, you need planning permission, and the car must be able to turn round and leave in forward gear. The council's street checker map shows if your road is classified.

A few other things can sink an application, so check them before you pay for a design:

  • A crossing within 10 metres of a junction, traffic lights or a roundabout (15 metres on a classified road) may be refused on safety grounds.
  • Gates must open inwards, and parking in front of a garage with outward-opening doors needs 6.0 metres of depth.
  • In a residents parking scheme, losing the bay outside may mean paying towards changing the Traffic Regulation Order plus new signs and lines, and the order is only remade when the scheme is next reviewed, which can be up to three years.
  • A street tree near the crossing can mean a trial dig at your cost. Removal is exceptional and the replacement is also at your cost.
  • Street lights, railings, bollards, signs and utility equipment that have to move are moved at the applicant's expense.

Which surface Bristol wants behind the kerb

The council's dropped kerb page says the driveway must be porous asphalt, porous concrete blocks, or concrete or clay block permeable paving on a sub-base such as 4/20 or Type 3, and that it must not have loose gravel surfacing. Resin-bound is not on that list either way. It is porous and has no loose stones, so before the licence goes in, ask the Highway Licences team to confirm a resin-bound finish on a permeable sub-base is acceptable for your crossing, and keep the reply.

That rule also settles bound against bonded. Resin-bonded is a resin coat with loose stone scattered on top, it sheds stones and water does not pass through it, so it sits on the wrong side of a rule written to keep gravel off the pavement. Resin-bound, where the stone is mixed through the resin, is the one to price for a Bristol drive with a new kerb. Our guide to resin-bound versus resin-bonded driveways goes through the difference.

The council also wants drainage where the drive meets the road. If the drive falls towards the highway, its guidance asks for a linear channel drain across the whole frontage, so water is caught before it reaches the pavement. That drain belongs in the driveway quote, not as an extra on the day.

Lay the drive first, then drop the kerb

Bristol's crossover guidance recommends finishing the parking area and any building work inside the property before the crossing is built, and says this will usually be a condition of the licence. The point is to stop the new crossing being damaged by the work behind it.

So the order is: confirm the space and the surface, get the licence approved, lay the resin-bound drive on a sound base, then have the crossing built. We check the base and flag anything under it that needs sorting before we quote, which matters more here because the drive goes in first.

Planning permission and the 5 square metre rule

Under the national permitted development rules for houses in England, a new or replacement hard surface between the front of the house and the road needs no planning application if it is under 5 square metres, or if it is made of porous materials or drains to a lawn or border within the property. A single 4.8 by 2.4 metre space is already 11.5 square metres, so the surface has to be porous or drain onto a soft area. A resin-bound drive meets the first of those. The rule covers houses, not flats. Our planning permission guide sets out the national picture.

Bristol has 33 conservation areas, and the Know Your Place website shows if your street is in one. Taking down a gate pillar, wall or fence over one metre high to get a car in needs planning permission in any of them. Two Article 4 directions go further: in the Cotham and Redland Conservation Area you need permission to demolish a front garden wall, fence or gate and to form a hard standing at all, porous or not, and in Henleaze you need permission to demolish a gate, fence or wall. In Henbury and at Sherrin Way, new boundary walls, gates and fences need permission too. In conservation areas the crossover itself re-uses the original kerbstones, slabs and pennant stone where they are undamaged.

Why a drive that drains matters in Bristol

Bristol City Council is the lead local flood authority for the city, responsible for flooding from surface water, groundwater and ordinary watercourses. Its flood strategy puts around 3,400 properties at risk from surface water flooding, and names urban creep as a growing problem: green front gardens and verges paved over a little at a time, each adding runoff to a sewer network that is already stretched.

One of the strategy's policies is to prevent new impermeable surfaces unless sustainable drainage handles the runoff. A resin-bound drive lets the rain through to the sub-base instead of sending it down the road, which is the kind of surface that policy points to.

Flats, terraces and renters

Only 6.0% of Bristol homes are detached, against 23.2% across England and Wales. Terraces are the biggest group at 32.1%, and one home in ten (10.2%) is part of a converted or shared house, three times the national share. Before choosing a finish, check the front garden against the 4.8 metre depth, and if the house is split into flats, budget for a planning application for the kerb.

More than a quarter of Bristol households rent privately (26.2%) and 13.0% rent from the council. A tenant needs a letter of permission from the landlord or housing association before a crossover application, and council tenants ask the council's estates team. Most car-owning Bristol households have one car or van (45.8%), so a single 2.4 metre space is often all the drive needs to be.

If the front garden is too shallow for a kerb, the space you can improve may be the garage, workshop or unit instead. We lay garage floor resin and workshop resin flooring in Bristol as well, and for a business unit with its own entrance, the council's commercial crossover licence is £1,427, so price the forecourt and the floor together.

Common questions

How much is a dropped kerb licence in Bristol?
Bristol City Council charges £357 for a domestic vehicle crossover licence and £1,427 for a commercial one. Apply before the kerb is touched: the retrospective domestic licence is £536. The contractor building the crossing is paid separately.
How deep does my front garden need to be for a dropped kerb in Bristol?
At least 4.8 metres from the pavement edge to the house, and 2.4 metres wide for one car or 4.8 metres for two. On an A, B or C road the guide is 5.3 metres deep by 3 metres wide, and you also need planning permission.
Will Bristol City Council accept a resin-bound drive behind a dropped kerb?
Its dropped kerb page lists porous asphalt, porous concrete blocks and permeable block paving, and bans loose gravel. Resin-bound is porous with no loose stones but is not named, so ask the Highway Licences team to confirm it for your crossing before you apply.
Do I need planning permission for a resin driveway in Bristol?
Usually not for a house, because resin-bound is porous. You do in the Cotham and Redland Conservation Area, where an Article 4 direction covers forming any hard standing, if the house is split into flats, if the kerb is on an A, B or C road, or if you remove a wall over one metre high in a conservation area. More in do you need planning permission for a resin driveway.
Should the driveway or the dropped kerb go in first?
The driveway. Bristol's crossover guidance recommends finishing work inside the property before the crossing is built, and it is usually a condition of the licence. Get the licence approved, lay the drive, then build the kerb.
I rent in Bristol. Can I have a resin drive and a dropped kerb?
Only with your landlord's or housing association's permission in writing, which the council asks for with the application. Bristol City Council tenants ask the council's estates team.
How much does a resin driveway cost in Bristol?
It depends on the area, the state of the base and access, plus the council's licence and the crossing if you need a kerb. Tell us about the drive and we send one fixed written price for the whole job. Our resin driveway cost guide explains what drives the number.

Get a quote in Bristol.

Tell us about the space and we will come back with a written quote for the whole job.