Resin driveways in Plymouth

In Plymouth, the dropped kerb sets the rules for the drive. The council wants a space at least 4.8 metres deep by 2.7 metres wide, the application from you as the homeowner, a £104 fee and then a £128 conditional approval fee. It wants planning permission first if the drive is impermeable or the house is in a conservation area. We lay resin-bound, which rain soaks through, and we give one fixed written price for the whole job.

Plymouth in numbers

WhatPlymouthWhat it means for your floor or drive
Dropped kerb fees£104 to apply, £128 on approvalNeither is refunded. The council takes 6 to 8 weeks, and the application has to come from the homeowner, not the contractor.
Contractor's permit£231 Section 171 permit (£462 if late)Paid by the accredited contractor who builds the crossing, on top of the council fees. Ask if a kerb quote includes it.
Space behind the kerb4.8 m deep by 2.7 m wideThe smallest hardstanding the council will give a domestic crossing for. Measure the front garden before paying for a design.
Planning permission first ifImpermeable drive, conservation area, listed, flat, classified roadAny one of these and planning comes before the crossing application. A resin-bound drive on a base that drains keeps the first one off the list.
Conservation areas15Every house in one needs planning permission before a new crossing. None of the council's recorded Article 4 directions covers drives.
Surface water flood risk5,047 properties (1 in 100 year)Most of the city is a Critical Drainage Area, where the sewers are at or over their limit.
29 August 2025128 properties reported flooded18 mm of rain fell in 15 minutes at Boringdon. The council's report puts most of it down to run-off from the roads.
Terraced homes32.8% (England and Wales 23.2%)Detached homes are 11.4%, under half the national share. Check the front garden against the 4.8 m depth first.
Homes in a converted or shared house7.5% (3.4%)More than double the national share. Anything other than a single-family house needs planning permission before a crossing.

Tell us the size of the space and your postcode, and we send one written price for the whole job.

The homeowner applies, an accredited contractor builds

Plymouth City Council takes domestic dropped kerb applications from the homeowner, and its page says contractors should not apply on your behalf. You send a plan showing the area and its measurements, and you can add a photo. The application fee is £104. If the council approves it, it asks for a conditional approval fee of £128. Neither is refunded, and the council puts processing at 6 to 8 weeks.

The crossing is built by an accredited contractor, and making sure they hold the permit is your job. The contractor needs a Section 171 highway permit, which costs £231 for a domestic crossing and covers the council's admin and two inspections. It rises to £462 if work starts on less than three working days' notice or without a permit. They also need £5,000,000 of public liability insurance, a supervisor and operative accredited under the New Roads and Street Works Act 1991, a copy of your approval letter and the council's crossing conditions.

Once it is built, the council inspects it and, if it meets the conditions, sends a letter of final approval. You are then responsible for the condition of the crossing for two years from construction, after which the council takes over its upkeep. Keep that letter with your house papers.

Five cases where Plymouth wants planning first

Plymouth City Council lists five cases where you need planning permission before you can apply for a crossing at all:

  • The house is on a classified road. The council publishes a street-by-street list of its A, B and C roads.
  • The house is a listed building or is in a conservation area.
  • The property is not a house for a single family: a flat, a maisonette, or commercial or industrial premises.
  • The ground has to be raised by half a metre or more, or lowered by a metre or more.
  • The hardstanding is made of impermeable material.

Conservation areas and the impermeable drive rule

Two of those catch people out. Every house in Plymouth's 15 conservation areas, from the Barbican and The Hoe to Mannamead, Stoke and Plympton St Maurice, needs planning permission before the crossing application, porous drive or not. The council also says you may need its permission to lay paving or build walls in a conservation area, and tree work on a trunk over 7.5 cm across at chest height needs six weeks' notice.

The impermeable rule applies anywhere in the city. Resin-bonded is a resin coat with loose stone on top that water cannot pass through, so it lands in that box, and so does any resin laid on a sealed slab with nowhere for the water to go. A resin-bound drive on a base that drains keeps it off the list. Our guide to resin-bound versus resin-bonded driveways sets the two side by side.

For the drive itself, the national rule still applies to a house: a new hard surface over 5 square metres in front of it needs no planning application if it is porous or drains to a lawn or border. A 4.8 by 2.7 metre space is already about 13 square metres. Plymouth has no Article 4 direction on drives. The only one the council records is about turning houses into shared houses, so the conservation area rule above is the one that bites. More in our planning permission guide.

What the Joint Local Plan asks of a front garden drive

Plymouth's planning guidance, the Supplementary Planning Document it shares with South Hams and West Devon, judges a front garden turned into parking on the street scene, highway safety and drainage. It warns that in many conservation areas a new hard standing may not be acceptable at all. Where one is, the guidance sets the rules in the list below.

Resin-bound is a permeable surface, so it meets the first rule, and it has no loose stone, so it needs none of the tarmac or concrete strip the guidance asks for in front of a gravel drive. The drainage channel is the part to price in on a sloping plot, and the water needs somewhere to go. Building Regulations keep soakaways at least 5 metres from a building or road, which a small front garden may not allow, so a border, a lawn or a drainage connection is often the answer. What resin can be laid over explains why the base decides whether any of this works.

  • Keep as much of the original wall, fence or railings as you can. Full frontage crossings will not generally be permitted.
  • Leave room for planting to screen the car.
  • Build it in a permeable material so water soaks into the ground. A gravel drive needs a 1 metre tarmac or concrete apron next to the road to keep stones off it.
  • It should not drain onto the road. If it slopes towards the road, fit a channel, connected to your own drainage or soakaway.
  • In front of a garage, allow at least 5.5 metres of drive.

Eight checks at the kerb before you pay for a design

The same guidance sets out what the highway team looks at where the drive meets the pavement:

  • The crossing must be at least 2.7 metres wide, three kerb lengths, and cross the pavement at right angles.
  • Within 10 metres of a junction or roundabout, or 15 metres on a classified road, it will likely be refused. On a classified road the council also expects room to turn and leave in forward gear, judged case by case.
  • It cannot be built over a BT or similar communications chamber, because those cover levels cannot change. Other covers and telephone poles have to be moved or lowered through the utility.
  • A pedestrian crossing, a disabled bay, a residents parking zone or pay and display at the spot will likely mean refusal. If you have a disabled drivers parking bay yourself, you do not qualify.
  • A new crossing needs at least 6 metres from any other access, whether a drive, a crossing, a junction or a service lane.
  • Two neighbours sharing one crossing get 5.6 metres at most, never the whole of both frontages.
  • Gates must not open outwards over the pavement. Walls, hedges, trees or street furniture that block the view may have to move at extra cost, or the application may be refused.
  • One working crossing per house, and no parking on the crossing itself.

Steep streets, full sewers and the August 2025 storm

Plymouth City Council's 2026 flood strategy describes a city that is mainly urban, with large impermeable areas and steep-sided catchments, so rain runs off fast and in volume. Many sewers are combined, carrying foul water and rain together, and most of the city is a Critical Drainage Area, where the sewers are at or over their limit. The strategy puts 5,047 properties at risk of surface water flooding in a 1 in 100 year event, against 962 from the sea and 441 from rivers.

That showed in the early hours of 29 August 2025. 18 mm of rain fell in 15 minutes at the Boringdon gauge, and 128 properties were reported flooded across the city: 37 in central Plymouth, 37 in Devonport, Milehouse and Keyham, 26 in Plympton, 22 in Plymstock and 17 in the north. The council's report found most of it came from run-off from the roads, with sewers overwhelmed and manhole covers lifted at places including St Levan Road, Lipson Vale and Honicknowle Lane.

A front garden sealed over and falling to the road sends its share straight into that system. A resin-bound drive on a free-draining base takes the rain down through the stone instead, which is what the council's guidance asks of a hard standing. We look at what is down now and how it drains before we price a resin-bound driveway.

One home in three is a terrace: what that means for resin

Census 2021 puts 32.8% of Plymouth homes in a terrace, against 23.2% across England and Wales, and only 11.4% detached, under half the national 23.2%. Another 7.5% are part of a converted or shared house, more than double the national 3.4%. Plenty of front gardens fall short of the 4.8 metres a crossing needs, and anything other than a single-family house needs planning permission before a crossing application.

About four households in ten rent: 22.6% privately and 18.4% from a social landlord. Because the council wants the application from the homeowner, a tenant's landlord is the one to apply.

Where there is no room for a drive, the resin job is often under a roof: a garage floor, a workshop floor or a unit with a commercial resin floor. A business yard is a different crossing. The council treats parking for more than four vehicles, or for vehicles heavier than the average car at 1.4 tons, as a commercial crossing, with a £104 application fee and a £278 conditional approval fee, and most need planning permission.

Common questions

How much does a dropped kerb cost in Plymouth?
Plymouth City Council charges a £104 application fee and, if it approves, a £128 conditional approval fee, neither refundable. The accredited contractor who builds it needs a £231 Section 171 permit, and the build itself is paid to them on top.
Can my contractor apply for the dropped kerb for me in Plymouth?
No. The council wants the application from the homeowner, and its page says contractors should not apply on your behalf. Once you have the conditional approval letter, the contractor applies for its own Section 171 permit.
How long does a dropped kerb application take in Plymouth?
The council puts processing at 6 to 8 weeks. After approval, the contractor has to give at least three working days' notice for the Section 171 permit before work starts.
How big does my drive need to be for a dropped kerb in Plymouth?
At least 4.8 metres deep by 2.7 metres wide, with a crossing at least 2.7 metres wide. In front of a garage, the planning guidance asks for at least 5.5 metres of drive.
Do I need planning permission for a resin driveway in Plymouth?
For the drive on a house, usually not, because resin-bound is porous. For a new crossing you do if the house is in a conservation area or listed, on a classified road, a flat or maisonette, needs a big change in level, or the drive is impermeable. More in do you need planning permission for a resin driveway.
Can I have a gravel drive with a dropped kerb in Plymouth?
The planning guidance allows a gravel hard standing only with a 1 metre tarmac or concrete apron next to the road, to keep stones off it. Resin-bound has no loose stone, so it needs no apron. See resin against gravel.
Who looks after a new dropped kerb in Plymouth?
You do, for two years from construction, once the council has inspected it and sent the letter of final approval. After that the council takes over its upkeep.
How much does a resin driveway cost in Plymouth?
It depends on the area, what is down now and how it drains, plus the council fees and the kerb if you need one. Tell us about the drive and we send one fixed written price for the whole job. Our resin driveway cost guide sets out what moves the number.

Get a quote in Plymouth.

Tell us about the space and we will come back with a written quote for the whole job.