Outdoor resin flooring that handles a British year.

Seamless outdoor resin flooring for paths, steps, porches, thresholds, balconies and seating areas: a continuous coating over the surface you already have, in a resin made for sun and rain, with the grip set for the spot it sits in. For a patio specifically, see our [patio resin flooring](/patio-resin-flooring/) page.

What you get

Grip in the wet

Aluminium oxide or sand broadcast into the coat. One UK step coating tests at a wet PTV of 56, low slip on the HSE scale.

A resin made for sun

Aliphatic polyurethane, polyaspartic or MMA outside, not a plain indoor epoxy, which makers say is not colourfast in UV.

Seamless, no joints

One continuous surface instead of slabs that weed up, rock and trip you.

Laid to the weather

Each system has its own minimum temperature, dew point margin and rain-free time, and we work to them.

How it works

01

Tell us the details

Tell us what is outside now, how it drains and the look you want, and we spec the right system.

02

Quote in writing

One fixed price for the path, steps or yard, in your inbox. The price we quote is the price you pay.

03

New surface laid

Prep the base, lay the resin and broadcast the grip in, then cure around a dry weather window.

Want a firm number? Send the size and your postcode and we come back with one written figure, not a range.

The exterior surfaces this covers

This is the page for the bits of the outside that get walked, not the patio you sit out on. Paths and side returns, a flight of steps, a porch or threshold, a balcony, the strip by a back door, a seating nook by the garden: anywhere underfoot that is tired but still solid. We bond a continuous resin coating over what is there and work a fine aggregate into it, so you keep the base and lose the joints, the weeds and the rocking slabs.

A patio is its own job, with its own prep, grip and drainage detail, so we have kept it separate; for a patio specifically, see our patio resin flooring page. And if what you want is a brand-new permeable surface for the drive rather than a coating over something existing, that is a different system again, covered on our resin-bound driveways page. Tell us which sounds like your job and we steer you the right way before we quote.

Which resins belong outside

The chemistry matters more outside than anywhere else. Remmers states it plainly: "Epoxy resins are not colourfast in general when exposed to UV-light and weather." So outdoors the wearing coat is usually one of three things. An aliphatic polyurethane, such as Sika's Sikafloor-420 or Liquid Plastics' Decothane Balcons, both sold as UV resistant and non-yellowing for balconies, terraces and stairways, and both marked "Do not use for interior applications." A polyaspartic, which Watco says lets an epoxy be used outside if it is overcoated. Or an MMA, the fast acrylic resin that takes foot traffic in about an hour.

Even the UV-stable ones are not magic. Flowcrete sells its deck coating as UV stable while noting on the same sheet that no resin system is totally colour fast, so very light colours in full sun are the ones to think twice about. Our guide to whether epoxy resin yellows explains the mechanism, and our polyaspartic flooring page covers the fast-cure topcoat in detail.

Each spot gets the grip it needs

Outside, the figure that counts is the wet pendulum test value, because that is how a step behaves on a November evening. HSE treats a wet PTV of 36 or more as low slip potential and 24 or less as high. Watco's Stepmarker step coating publishes 69 dry and 56 wet; Flowcrete's exterior deck systems are rated above 55 in the wet test. A smooth gloss coat on its own gets nowhere near that, and Watco warns its plain Protecta-Coat "could become slippery" outdoors.

So we broadcast an anti-slip aggregate into the wet resin and set the grade to the spot. Aluminium oxide is the hard-wearing choice: Polycote supplies it in graded fractions such as 1.4 to 0.9mm and 3 to 1mm, with a polished stone value of 70, and Tor's fine white grade goes on at about 1kg per m². A heavy blind of around 3kg per m² is what one UK supplier specs for external stair landings and ramps, while a seating area or porch can take a light scatter of under 1kg per m². One catch: Watco notes that laying a coat too thick buries the grit and cuts the slip resistance, so more resin is not more grip.

Laid to the weather, not the calendar

Every outdoor system has its own laying window, and they are far apart. Sika's Sikafloor-420 and Virtus' walkway coating want 5°C; Sika's polyaspartic +8°C; a standard epoxy 10°C. At the cold end, Decothane goes down from +2°C, Polycote Slip Grip from 0°C and Watco Protecta-Coat from minus 10°C. Whatever the product, the surface has to sit at least 3°C above dew point, and Decothane says a frozen substrate must thaw for 24 hours first.

Rain is the other clock. Sika gives Sikafloor-420 about 5 hours at 20°C before it is rain resistant, stretching to about 15 hours at 10°C, while Virtus says rainfall straight after laying its MMA coating does no harm. Foot traffic follows the same split: about an hour on MMA, about 3 hours on Sika's polyaspartic, and about 24 hours on Sikafloor-420 at 20°C. That is why we book outdoor work against the forecast and pick the system to suit the season.

Paths, steps and balconies live or die on the prep

Outdoor resin is a skin over what is already there, so it bonds best to a path or step that is sound and shedding water rather than holding it. Liquid Plastics asks for concrete of at least 25 N/mm² that passes a 1.5 N/mm² pull-off test, a hammer test across existing concrete with any hollow areas cut out and repaired, and 28 days on new concrete. Polycote is clear that water jetting will not key a surface well enough, and Watco says old, hard, shiny stone steps need scarifying first. Moss, algae and frost all come off before anything goes down.

Balconies need one more question asked. A slip-resistant coating is not the same as waterproofing: Virtus says of its walkway coating "Not a fully waterproofing system", and Flowcrete says its deck coating is "not designed to resist hydrostatic water pressure". Where a balcony sits over a room, it needs a reinforced waterproofing system, which is what Decothane Balcons is. Where a tread is cracking or a threshold ponds water, we say so up front rather than coat over it and watch it lift.

Outdoor resin coatings at a glance

Figures from UK makers' data sheets (Sika, Liquid Plastics, Flowcrete, Virtus, Watco, Polycote, Remmers) and HSE slip guidance. They are per product, so check the sheet for the system you are quoted.

What you want to knowTypical figureWhat it means for you
Slip, grit-finished step coatingPTV 69 dry, 56 wet (one system)Low slip in the wet on the HSE scale (36 and up)
Slip, smooth gloss coatCan become slippery outdoorsGrit goes in the coat on anything walked in the rain
Aluminium oxide gritGraded fractions such as 3 to 1mm, PSV 70Hard, long-wearing grip; coarser for steps and ramps
Grit on steps and rampsUp to about 3kg per m² full blindA light scatter suits a porch or seating area
Minimum laying temperatureFrom minus 10°C to 10°C, by productThe season decides which system we use
Dew point marginAt least 3°C aboveNo laying onto a surface about to collect condensation
Rain resistantAbout 5 hours at 20°C (Sika PU); MMA at onceA dry window matters most for polyurethane
Foot trafficAbout 1 hour (MMA) to 24 hours (PU) at 20°CSteps back in use the same day or the next
Concrete strength25 N/mm², 1.5 N/mm² pull-offHollow or crumbling patches are cut out and repaired first

Where we work

Anywhere in Great Britain

We lay outdoor resin floors anywhere in Great Britain. Outdoor work runs to the weather, so we book it around a dry spell and tell you if the forecast moves the date.

Resin in your city: Bristol, Newcastle, Glasgow, Manchester, London, Birmingham, Leeds, Liverpool, Sheffield, Leicester, Nottingham, Coventry, Derby, Plymouth, Bradford.

Common questions

Can you lay resin over my existing path or steps?
Often, yes, as long as the base is sound and shedding water rather than holding it. A coating follows whatever is underneath, so a cracked tread, a hollow patch or a dropped step gets sorted first, and old shiny stone gets scarified. We look at what is there when we quote and tell you straight what it needs. (For a patio, see our patio resin flooring page.)
Are resin steps and paths slippery in the rain?
Not with grit in the coat. One UK step coating tests at a wet PTV of 56, comfortably low slip by HSE standards, while a smooth gloss coat outdoors can be slippery. We broadcast aluminium oxide or sand into the resin and go coarser on steps and entrances.
Does an outdoor path or step fade in the sun?
We lay an aliphatic polyurethane, polyaspartic or MMA outside, which UK makers sell as UV resistant and non-yellowing. No resin is totally colour fast, so the palest colours in full sun change most. You tell us the look and we spec it when we quote.
Is this the same as a resin driveway?
No. Outdoor resin flooring is usually a coating over a path, steps or other exterior surface you already have. A resin driveway is a new permeable surface of stone bound through resin, which is a different system covered on our resin-bound driveways page, and on our resin-bound paths page for a new path.
Will a resin coating waterproof my balcony?
Not on its own. Makers of slip-resistant walkway coatings say they are not a full waterproofing system, so a balcony over a room needs a reinforced balcony waterproofing system, which some UK makers supply with the grip built in.
Can it be laid in winter?
Some systems can. Minimum laying temperatures run from minus 10°C on a cold-cure polyaspartic to 10°C on a standard epoxy, and every one needs the surface 3°C above dew point and free of frost. We pick the system to suit the season and the forecast.
How much does outdoor resin flooring cost?
It depends on the area, the state of the base and the system we use. We quote one fixed price in writing after we have seen what is outside, and that price does not change on the day. Our resin flooring cost guide covers the drivers.
Can you use epoxy resin flooring outdoors?
Not as the top layer. UK makers say epoxy is not colourfast in UV and weather, so outside the wearing coat is a UV-stable polyurethane, polyaspartic or MMA, sometimes laid over an epoxy base. Our guide to whether epoxy goes yellow explains why the topcoat choice matters outside.

Get your quote.

Tell us about the space and we will come back with a written quote for the whole job.