A resin patio that grips in the wet, with no slabs to lift.
Resin patio flooring, laid over your existing slabs. A seamless, grippy finish with no joints to weed or rock, that handles British weather and brushes clean.
What you get
Grip in the wet
Anti-slip aggregate broadcast into the surface, so it stays safe in the rain.
No more lifting slabs
A seamless finish with no joints to weed, no slabs to rock and nothing to trip on.
Washes clean
Spills and dirt brush or hose off the sealed surface instead of soaking into the stone.
Colour that holds
Natural stone tones through to bolder colours, chosen when we quote and UV-stable, so they hold their colour far better than standard epoxy.
How it works
Tell us the details
Tell us about the area, what is down now, how it drains and the finish you want, and we spec it to suit.
Quote in writing
One fixed price for the patio, base work included. What we quote is what you pay.
New surface laid
Prep the surface, lay the resin and broadcast the grip in, then cure. We plan the work around a dry weather window.
Want a firm number? Send the size and your postcode and we come back with one written figure, not a range.
What a resin patio actually is
The resin patio we lay is a coating bonded over the slabs you already have, rather than a brand-new surface laid from scratch. Instead of ripping out the paving, we bond a continuous resin finish over the top and broadcast a fine aggregate into it for grip. You end up with one smooth, seamless surface rather than a grid of slabs with joints that weed up, rock and trip you.
It suits a patio, porch or set of steps that are structurally sound but tired, stained or uneven across the joints. Where it does not suit is a surface that is moving, cracking up or holding water, because a coating follows whatever is underneath it. If the base is past it, we say so when we quote rather than skinning over a problem. Our guide to resin patio ideas and the honest pros and cons walks through where a resin patio works, where it does not, and how to design one.
If what you actually want is a brand-new permeable surface for the drive rather than a coating on an existing patio, that is a different system. We cover it on our resin-bound driveways page, and our outdoor resin flooring page weighs up which external surfaces suit a coating and which do not.
Grip in the wet, colour that holds
A patio that turns into a skating rink the moment it rains is no use to anyone, so grip is the first thing we sort. We broadcast an anti-slip aggregate into the resin while it is wet, which gives the finished surface a fine texture underfoot. It stays safe in the rain, but it is still smooth enough to brush leaves off and easy to keep clean. The difference shows on the pendulum test the HSE uses: one UK maker publishes a smooth sealed resin floor at a wet value of 17, in the high slip band the HSE sets, while gritted exterior coatings publish 55 and over (Watco Stepmarker: wet PTV 56). Frost and ice still make any outdoor surface slippery, resin included.
Outdoors you also have the sun to think about. Standard epoxy is not colourfast in sunlight and weather, so we use a UV-stable system outdoors and the colour you pick holds up far better; our guide to whether epoxy resin yellows explains exactly why. You tell us the colour you are set on and we spec it; the colour and finish are settled when we quote.
If you want a surface that is touch-dry and back in use fast, ask about polyaspartic flooring when we quote. It cures quickly: Sikafloor-530, a polyaspartic coating, takes foot traffic after about 3 hours and full traffic after 6. It is also UV-stable, which makes it a strong option for an outdoor area you cannot afford to lose for long.
Drainage and the base it sits on
A resin coating is only ever as good as the surface underneath it. Because it is a skin over what is already there, it bonds best to a base that is sound, clean and draining the right way. If your patio puddles, slopes back towards the house or has slabs that move, those issues do not disappear under resin: they come back through it.
So before we quote, we want to know what is down now and how it behaves in the wet. Where the existing slabs or concrete are solid and fall the right way, we can usually prep and lay straight over them, once moss, algae and loose material are cleared off. Where there is movement, standing water or the falls are wrong, that needs sorting first, and we will say so up front rather than coat over it and watch it fail.
The weather matters on the day too. UK data sheets set minimum laying temperatures by product, want the surface at least 3°C above the dew point, and need rain kept off for hours afterwards: about 5 hours at 20°C for Sikafloor-420. Done properly, the prep is most of the job. Get the base right, sort the drainage and bond the resin to a clean surface, and the finish stays put and looks the part season after season.
What a resin patio costs
Cost comes down to the area, the state of the base and the finish, not a flat rate per square metre. We quote one fixed written price after we have seen it, with nothing added on the day. See our guide to what a resin patio costs.
Where we work
Anywhere in Great Britain
We coat patios anywhere in Great Britain, over sound slabs or concrete. Our guide to resin patio ideas, pros and cons helps you decide before you ask for a price.
Resin in your city: Bristol, Newcastle, Glasgow, Manchester, London, Birmingham, Leeds, Liverpool, Sheffield, Leicester, Nottingham, Coventry, Derby, Plymouth, Bradford.
Common questions
- Will it be slippery when it rains?
- No. We broadcast an anti-slip aggregate into the resin so the finished surface has a fine texture underfoot. It stays safe in the wet, but is still easy to brush and hose clean.
- Does it fade or yellow in the sun?
- We use a UV-stable system outdoors, so the colour you pick holds up far better than standard epoxy where the sun hits it. You tell us the look and we spec it when we quote.
- Can you lay resin over an existing patio?
- Often, yes, as long as the existing slabs are sound, level and well drained. We assess the base first, because a resin patio is only as good as what it is laid over. If the base is moving or holding water, we flag it when we quote.
- What are the disadvantages of a resin patio?
- A resin patio needs a sound, draining base, and the coating follows whatever is underneath, so it is not the answer for slabs that are moving or badly cracked. Laid over the right base it avoids the weeds, rocking slabs and puddles you get with old paving.
- Is resin any good for a patio?
- Yes, for the right patio. Over a sound, well-draining base it gives you one seamless, grippy surface with no joints to weed or rock, and it brushes clean. The base is what makes or breaks it, which is what we check when we quote.
- Is this the same as a resin driveway?
- No. This is a coating over a patio, porch or steps you already have. A resin driveway is a new permeable surface of stone bound through resin, which is a different system covered on our resin-bound driveways page.
Get your quote.
Tell us about the space and we will come back with a written quote for the whole job.