If you are pricing up a resin floor, two words keep coming up: epoxy and polyaspartic. Both are a world apart from a tin of garage floor paint, and both are laid over your existing concrete. But they are different materials with different strengths, and the right one depends on how the floor will be used, how much sunlight it sees, and how long you can have the space out of action. Here is the honest breakdown, starting with the comparison most people are really after.
The quick comparison (scan this first)
| Epoxy | Polyaspartic | |
|---|---|---|
| Walk on it | About 12 to 24 hours | About 4 to 5 hours |
| Car back on it | About 48 hours to 7 days, by product | About 8 to 16 hours |
| Full cure | About 7 days | About 5 to 7 days |
| Next coat | 16 to 36 hours | 90 minutes to 3 hours |
| Working time once mixed | About 15 to 25 minutes (trade products) | About 10 to 30 minutes |
| Coldest it can go down | Usually 10 to 15°C, air and slab | 10°C down to 2°C, some to minus 10°C |
| Sunlight (UV) | Yellows over time, most in pale colours | UV stable, holds its colour |
| Prep | Laitance ground or blasted off, slab under 75% RH | The same: clean, sound, dry, under 75% RH |
| Build | Laid thick, carries metallic and heavy flake | Thin coats, about 200 microns each |
| Chemical resistance | Excellent | Good to excellent, by product |
The times are from UK manufacturers' data sheets at 20°C. Every one of them takes longer in a cold garage, so treat them as the best case for a British winter. Price is left out on purpose: no UK cost guide publishes a polyaspartic rate per square metre, so any figure you see for it is a quote, not a market price. Our resin flooring cost guide has the epoxy bands. The rest of this guide explains the why behind each row, so you are not surprised six months after the floor goes down.
What epoxy resin actually is
Epoxy is a two-part (two-pack) thermosetting resin: a resin and a hardener mixed on site, which triggers a chemical reaction that cures the liquid into a hard, solid plastic. The systems we lay are 100% solids, meaning there are no solvents to flash off as it cures. What you pour is what you get: a thick, dense film chemically bonded to the slab.
Because it is poured thick and self-levels, epoxy is the material of choice when you want depth and a flawless surface. It is what gives a metallic floor its three-dimensional, marbled look, and it carries a heavy flake broadcast well. The trade-off is time and temperature: a full chemical cure takes around seven days, and most epoxies need the air and the slab at 10 to 15°C or more while they cure. Concrete is slow to warm up, so an unheated garage in January can be a real constraint, and a cold slab is one reason epoxy stays tacky.
What polyaspartic actually is
Polyaspartic is a two-part aliphatic resin coating. In plain terms: it cures very fast, it is tough, and it holds its colour in sunlight. In flooring it goes on in thin coats, around 200 microns each, and very often as the clear topcoat over a flake or colour build rather than as the whole build.
Its headline trick is speed. A polyaspartic system can be walked on within hours and back in full use the same day or the next, which is why it is the basis of our fast-cure floors. Many polyaspartics also cure in the cold: some UK products are rated down to 2°C, and one down to minus 10°C, where epoxy would simply sit there uncured. Not all of them, though. Some need 10°C, the same as an epoxy, so the product matters.
Cure time and downtime: the biggest difference
This is the one that decides most jobs. Epoxy takes roughly 12 to 24 hours before you can walk on it, and between two days and a week before you park a car on it, depending on the product. Polyaspartic takes the next coat in two or three hours, takes foot traffic in four or five, and is ready for a car in 8 to 16. If you run a unit and cannot lose a week of trading, or you only have a weekend to get the garage back, that alone can settle it.
Two things are worth knowing before you book a one-day floor. First, back in use is not the same as fully cured. Polyaspartic still takes five to seven days to reach full cure, so keep strong chemicals and standing water off it for that first week. Second, the working time once mixed is short on both: trade epoxies and polyaspartics alike give roughly 15 to 30 minutes at 20°C, and polyaspartic drops to about 10 minutes on a hot day. What differs is how fast the next coat can go on, which is where polyaspartic saves its days.
Sunlight and yellowing
Standard epoxy ambers under ultraviolet light. In a dark garage you will never notice, but in a unit with big south-facing doors, a glazed showroom, a conservatory floor, or anything outdoors, an exposed epoxy floor can yellow over the years, most visibly under a pale or white colour. UK epoxy makers say so on their own data sheets: light colours in UV are prone to cosmetic yellowing, and the rate cannot be predicted. It does not weaken the floor, it just changes how it looks. Polyaspartic is UV-stable and holds its colour. There is more on this in our guide to whether an epoxy floor goes yellow.
Why this matters for your build
Toughness: abrasion, impact and flexibility
Cured epoxy is very hard and rigid, which makes it excellent against abrasion. Polyaspartic is tough and resists scratching well, and some are made to flex a little: one UK product is rated to cope with slight movement around vibrating machinery. That bit of give helps on a slab that expands and contracts with the seasons.
In the real world, both perform on a busy workshop or an industrial floor. What separates a floor that lasts from one that does not is far more about the build thickness and the preparation than which of the two resins is on the label.
Chemical resistance
Epoxy has excellent chemical resistance, which is why it is the usual choice where oils, brake fluid, solvents and harsh cleaning chemicals are a daily fact of life. Polyaspartic ranges from good to excellent depending on the product, and it will not yellow in the sun at the same time. For the most aggressive chemical environments a thick epoxy build is still very hard to beat, and for one specific chemical the maker's resistance chart is the thing to check.
Build thickness, finish and cost

Epoxy is poured thicker and is the material for deep metallic pours and heavy flake. Polyaspartic goes on in thin coats of around 200 microns, and putting it on thicker does not help: it then takes far longer to cure through. What it buys you is speed and UV stability. On cost, UK guides publish epoxy rates but not polyaspartic ones, so the only fair comparison is two quotes for your own floor. On a domestic garage finished in flake, the difference in the finished look can be minimal; the difference in downtime is not.
Not sure which build suits your floor?
Tell us about the space and how soon you need it back. We will spec the right system for it and send a fixed price in writing.
The hybrid reality: most good floors use both
A fast garage floor is often not pure polyaspartic. It is commonly a base coat, a flake broadcast, and a clear polyaspartic topcoat that locks the flake in. The two materials are not really rivals, they are tools, and a well-designed floor often pairs them: epoxy for body and bond, polyaspartic for speed and colour protection on top. When we quote, the job is to spec the right build for your slab, your use and your timescale, not to push a single product.
So which should you choose?
Lean towards epoxy, or an epoxy-led build, when:
- You want a deep metallic or heavy flake finish.
- The floor is indoors and out of strong, direct sunlight.
- You can spare a week before the car goes back on.
- The environment is chemically aggressive.
Lean towards polyaspartic, or a polyaspartic topcoat, when:
- You cannot have the space out of action for more than a day or two.
- The floor sees strong sunlight, or it is outdoors.
- The garage is cold, below the 10 to 15°C most epoxies need to cure.
- Scratch resistance and a little flexibility matter for how the floor is used.
The part that actually decides how long it lasts
Here is the thing neither manufacturer puts on the tin: the resin is not what makes or breaks the floor. Preparation is. A floor poured onto a dusty, unground or contaminated slab has nothing to bond to, and it will lift, the finest epoxy and the fastest polyaspartic alike. Both materials ask for the same thing on their data sheets: laitance ground or blasted off, a clean, sound slab, and moisture below 75% relative humidity. Our guide to how a resin floor is installed walks through each step.
The non-negotiable
About this guide
Who wrote this
The Obsidian Resin team wrote this epoxy and polyaspartic comparison. We prep and pour resin floors for garages, workshops, showrooms and commercial units anywhere in Great Britain, and we lay both epoxy and polyaspartic systems, so neither one is the product we are trying to move.
Why we wrote it
"Epoxy or polyaspartic" comes up on almost every garage enquiry, and a spec sheet rarely answers the practical question of which one suits your floor, your light and your downtime. This is the explanation we would give you about your own garage.
Our honest position
We would rather you chose a professionally laid floor of either kind than a DIY epoxy kit, and that is our commercial interest in plain view. We do not push one resin over the other; we spec what suits the job. Often that is epoxy, often a hybrid, and where downtime or sunlight rules, polyaspartic.
Frequently asked questions
- Is polyaspartic better than epoxy?
- Not better, different. It is back in use faster, cures in colder garages and resists UV, but epoxy is laid thicker and is better for deep metallic and heavy flake. The right answer depends on the garage: dark and indoors suits epoxy, sunny or needed back fast suits polyaspartic.
- Can you really use the floor the same day with polyaspartic?
- For most domestic floors, yes: walk on it in about four or five hours and park on it after 8 to 16, depending on the product. It still takes five to seven days to fully cure, so keep strong chemicals off it that first week. Colder jobs take longer.
- Will an epoxy garage floor go yellow?
- Only where it sees strong UV. A dark, indoor garage will not noticeably yellow. A sunlit or glazed space might, which is when we use a polyaspartic topcoat or build.
- Which lasts longer?
- Both last many years when laid properly. Lifespan is decided far more by preparation and build thickness than by which resin is used.
- Can you lay epoxy in a cold garage?
- Only if you can warm it. Most epoxies need the air and the slab at 10 to 15°C or more while they cure, and concrete is slow to warm up. Some polyaspartics are rated down to 2°C, one UK product to minus 10°C, which is why they suit unheated garages in winter.
- Can I put polyaspartic over an existing epoxy floor?
- Often, if the existing floor is sound and properly abraded first. We assess it when we quote and tell you straight if it needs more than a topcoat.
- Which do you recommend for a home garage?
- Usually a flake build with a hard topcoat. Whether the base is epoxy or fast-cure comes down to your timescale and the conditions on the day, which we work out when we quote.