Heavy-duty floors for heavy-duty sites.
Industrial epoxy resin floors for warehouses, factories and plant rooms, built to take forklifts, plant and chemical spills. Anti-slip options, line marking and a written workmanship guarantee on every job.
What you get
Takes the load
Specified to carry plant, racking and pallet-truck traffic without failing.
Chemical and impact resistant
Stands up to oils, solvents, salt and the knocks of a working floor.
Safety built in
Anti-slip aggregate and bay or walkway line marking where you need it.
Phased to your shifts
We plan the work around production so you keep moving.
How it works
Tell us the details
Tell us about the floor, the loads and the traffic, and we spec the system to match.
Quote in writing
You get one price for the whole job in writing, locked in before we start.
New floor laid
We grind the slab back, prep, pour and cure, phased around production.
Spec to the job, not a one-size floor
Industrial floors vary hugely, from a light assembly unit to a busy warehouse or heavy plant room. Tell us the loads, the traffic and the chemicals you are dealing with, and we spec a resin system, build-up thickness and topcoat to match, rather than pouring the same floor everywhere.
For grip in wet or oily areas we broadcast a quartz or anti-slip aggregate into the topcoat.
Prep on an industrial scale
We grind the slab back, repair cracks and joints, and address any contamination before the resin goes down. A floor that lifts under plant traffic is a floor that was never prepped properly, so we do not cut that corner. These are the same epoxy and polyurethane systems we lay for commercial units and workshop floors, scaled up. Our guide to how a resin floor is installed shows the method in full, and what a resin floor costs covers what drives the price.
Where we work
Across Leicestershire and the East Midlands
We lay industrial floors across Leicestershire and the East Midlands and travel further for larger sites, from resin flooring in Leicester out to towns like Coalville and Hinckley. See everywhere we cover.
Common questions
- Can you handle a large floor area?
- Yes. We phase large floors in sections around production and travel further for bigger commercial and industrial jobs.
- Will it take forklift and plant traffic?
- A correctly specified and fully cured industrial system takes pallet trucks, forklifts and plant. We spec the build-up to the loads when we quote.
- Can you mark out bays and walkways?
- Yes, line marking goes into the floor as part of the job. Tell us the layout when you get in touch and it goes on the quote.
- Is industrial resin flooring the same as epoxy?
- Epoxy is one of the resin systems we use for industrial floors. We also use polyurethane and other build-ups, and we spec the right one to your loads, traffic and chemicals when we quote.
- How long will an industrial resin floor last?
- A properly prepped two-coat epoxy floor handles 10 to 20 years of regular use, and the single biggest factor is the prep, which is why we never skip the grind. On a hard-working industrial site we spec the build to the traffic and chemicals so it lasts.
Get your free quote.
Tell us about the space and we'll email your fixed-price written quote inside two working days.